
Operation PSM-500/500L/500LT SCPC Satellite Modem
Page 3-16 PSM-500/500L/500LT - Rev. 0.91
Table 3-6. Modulator Parameter Detail
Modulator Parameter Detail
Read Only Read Only Modulator Carrier Status
Read Only Read Only Modulator Input Data Status
Internal, OK
Read Only Read Only Modulator Bit Rate Clock
Status
Read Only Read Only Modulator Test Status
70.000000MHz
Numeric 50.000 000 to 90.000 000
MHz
Carrier center frequency
IF Offset
Numeric –1,250.000 to +1,250.000
Carrier offset frequency
–20.4dBm
Numeric +5.0 to –35.0 dBm
+3.0 max at 50Ω
Transmit output power level
Selection 0 = Disable, 1 = Enable Carrier output enable
QPSK
Selection 0 = BPSK, 1 = QPSK,
2 = OQPSK, 3 = 8PSK,
6 = 16QAM
Modulation Mode. Some
values left available for new
options.
Selection 0 = Normal, 1 = Inverted Modulation Spectrum control
Normal
Selection 0 = IESS, 1 = Legacy Modulation Spectrum Filter
Control. Legacy for PSM-
4900 compatibility.
Continuous
Selection 0 = Continuous, 1 = Burst Only available with burst
option installed.
64 Symbols
Selection 0 = 32, 1 = 64 Symbols Selects preamble length when
burst option installed.
Disabled
Selection 0 = Disable, 1 = Enable Automatic Uplink Power
Control
6.5dB
Numeric 3.0 to 20.0 dB AUPC remote receive Eb/No
level set point.
–10.0 dB
Numeric +5.0 dBm to Minimum level Max. Transmit level under
AUPC control
–20.0 dB
Numeric Maximum level to –35 dBm Min. Transmit Level under
AUPC control
Manual
Selection 0 = Automatic,
1 = Confirm,
2 = Manual
3 = Manual & Pwr Loss
Manual requires manual
Carrier enable after Mod
output change. Option 3
forces Cxr off after power fail.
Selection
0 = 50Ω, 1 = 75Ω
Transmit IF impedance.
Kommentare zu diesen Handbüchern